DOUBLE RANGE ELECTROMECHANICAL STABILISERS SVD range

POWER	INPUT	OUTPUT	FREQUENCY	SPEED	ACCURACY
FROM 1,6KVA TO 20KVA	FROM 190V TO 245V	220V	50/60 Hz	20 mSEC/V	± 1,5%
	FORM 165V TO 270V

The continuous evolution of EMC rules and the needs of areas with large voltage variations brought to the new SVD electromechanical voltage stabilisers, with double input voltage range. The system allows the stabiliser to operate under very bad input voltage coditions up to a ±25% wit hthe same accuracy.When the input voltage situation is not critical, the stabiliser allows to apply a load up to twice the rated powerwith a capacity of regulation up to ±15%.

All models are fitted with a digital voltmeter with input and output reading switch, a pilot lamp and a fused crcuit breaker up to 10kVA

double range electromechanical voltage stabilisers SVD

Power	from 1,6kVA to 20kVA
Input voltage	220V
Input acceptable variation	from 165V to 270V (gamma estesa) from 190 to 245V (potenza massima)
Output voltage	220V
Output voltage accuracy	± 1.5%
Output stabilised fine voltage regulation	± 5%
Frequency	50/60Hz
Regulation speed	20/1000 sec. / Volt
Load tolerable variation	da 0 a 100%
Power factor acceptable variation	0 - 1
Full load efficiency	> 98%
Harmonic distortion	< 0,5%
Ambient temperature	0° : 45°C
Altitude	up to 1000m. above sea level without derating
Applied standards	IEC 686
Protections	Fused circuit breaker up to 10kVA RFI protection on control circuit board Overvoltage protection on control circuit board
Standard accessories	Fused circuit breaker (up to 10kVA), digital voltmeter with input/output voltage reading selector, Fine output stabilised voltage regulation screw up to ±5%, pilot light, in/out terminals on the rear side

power kVA		part no.	dimensions mm.			DWG	weight
in. 190/245V	in. 165/270V	part no.	A	B	C	DWG	kg.
3.2	1.6	SVD03KD	485	510	177	A	21.0
4.6	2.3	SVD04KD	485	510	177	A	23.0
6.0	3.0	SVD06KD	485	510	226	A	30.0
8.0	4.0	SVD08KD	485	510	226	A	32.0
10.0	5.0	SVD10KD	485	510	226	A	40.0
15.0	7.5	SVD15KD	600	900	300	B	56.0
20.0	10.0	SVD20KD	600	900	300	B	84.0

A
B

Data shown on this page are for reference only and can be changed withouth further notice