SINGLE PHASE ELECTRONIC VOLTAGE STABILISERS SE RANGE

The new range of electronic voltage stabilisers has been designed considering the most recent EMC standards and allows an efficient and fast voltage regulation within an acceptable limit and a strong protection through input and output filters and spike protection. In a compact and simple design we included two output stabilised sockets. It requires less than 200 milliseconds the correct sudden variations of 88V, it is completely free from harmonic output distortion. SE stabilisers include an autotransformer with different outputs which allow the voltage regulation through a circuit board testing the output voltage and providing the signal to a set of triacs.1500VA and 10000VA models include an automatic circuit breaker, while the others have a mains illuminated switch with a fuse protection. Supply cable is included up to 2000VA, otherwise, a connection board is provided on the rear side of the equipment. On request, the SEI type with galvanically isolated transformer and in/out power RFI/EMI suppression filters can be supplied.

STABILIZZATORI DI TENSIONE ELETTRONICI SERIE SE DA 300VA A 2000VA

STABILIZZATORI DI TENSIONE ELETTRONICI POTENZE DA 3000VA A 10000VA

Power	from 300VA to 10kVA
Input rated voltage	230V
Input acceptable voltage range	± 15% (from 195V to 264V)
Output rated voltage	230V
Output voltage accuracy	± 3%
Frequency	50Hz (*60Hz available on request)
Regulation speed	2/1000 sec. / Volt
Load acceptable variation	da 0 a 100%
Cos-phi tolerable variation	0 - 1
Full load efficiency	> 98%
Harmonic distortion	< 0,5%
Ambient temperature	0° : 45°C
Altitude	up to 1000m. above sea level without derating
Applied standards	IEC 686
Protections	Fuse protection from 300VA to 1000VA Automatic circuit breaker from 1500VA to 10kVA
Standard accessories (up to 1000VA)	2-poles illuminated input switch, input cable, 2 output sockets
Standard accessories (1500-2000VA)	2-poles automatic circuit breaker, input cable, 2 output sockets
Standard accessories (3000-10000VA)	2-poles automatic circuit breaker, analog voltmeter with input/output voltage reading, in/out connections on terminal blocks, 19" rack enclosure

power	part no.	dimensions mm.			DWG	weight
VA	part no.	A	B	C	DWG	kg.
300	SE00300	125	270	150	A	6.1
500	SE00500	125	270	150	A	6.4
1000	SE01000	125	270	150	A	8.6
1500	SE01500	180	370	195	A	10.3
2000	SE02000	180	370	195	A	13.3
3000	SE03000	485	510	177	B	16.0
4000	SE04000	485	510	177	B	17.5
5000	SE05000	485	510	177	B	22.0
7500	SE07500	485	510	220	B	27.0
10000	SE10000	485	510	220	B	31.0

UP TO 5KVA

7,5 & 10KVA

ON REQUEST WE SUPPLY SEN STABILISERS WITH DIFFERENT RATED VOLTAGE AND FREQUENCY: 110V,200V,220V,240V, AND OTHERS ON REQUEST

ON REQUEST WE SUPPLY SEN STABILISERS WITH DIFFERENT ACCESSORIES, LIKE PLUGS AND SOCKETS TO MOST INTERNATIONAL STANDARDS, INCREASED FILTERS AND PROTECTIONS, VOLTMETER ON FRONT PANEL

A
B
	MOD. SE03000 : SE05000	RACK 19" ENCLOSURE 4he
	MOD. SE07500 : SE10000	RACK 19" ENCLOSURE 5he

Data shown on this page are for reference only and can be changed withouth further notice